Repairing Xbox 360 3ROL (Code 0110)

3ROL code 0110 is caused by lack of memory. In Some case it’s happened due to improper solder in memory unit. I had experienced in error code 0110 and i suspect it’s caused by bad solder in 2 memory unit near GPU


Memory unit that causing 3ROL Code 0100

To fix this problem i check this two memory unit by turning on my xbox 360 for 5 minute then turn it off and see the temperature differences between this two memory unit (on my xbox 360 memory unit near CPU sorely hotter than the other memory unit).Then give some pressure using our hand but don't push it to hard or you will broken down the motherboard.

Give several coin on top of your memory. This coin will act as head sink and reduced memory temperature.


Coins used as head sink of your xbox 360 memory


Coins used as head sink for your xbox 360 memory

Turn on again your xbox 360 and usually 3ROL code still occurred but don't worry it’s a normal. Check again the error code and its code should change into 0102 if you give the right pressure on your memory.

Leave your xbox 360 with 3ROL code 0102 for 5 minute and turn off its fan. This will make solder joint more flexible due to hot temperature. Then turn off your xbox 360 and leave it for 10 minute to make it cooler.
Finally turn on your xbox 360 again and hope it will "green" forever (it works for my xbox 360 and should works for your xbox 360 too)